Locate construction machinery & optimise machine utilisation


Identify savings potential & optimize machine utilization

We accompany you in the digitalization of your processes and offer you complete solutions in telematics.

At the beginning there is the consultation and the determination of the savings potential through the use of telematics.
Our technicians support you in the installation and commissioning of telematics systems and GPS trackers - step by step.

Benefit from our experience from many successfully implemented projects in the construction industry.
No matter if you are a small local construction company or a large international corporation.

Construction machine tracking offers you the following advantages:

  • You can optimize your machineutilization and discover potential savings
  • GPS tracking in real time means you always know where your construction machines & equipment are located
  • React to critical conditions of your machines by setting up alarms (example: unauthorized use, upcoming maintenance...)
  • Reduce your operating expenses and save time & costs with GPS construction machine location.



Compare machines & identify potentials

With the performance module, the utilization and efficiency of the vehicle and machine fleet can be compared easily and clearly.
Benefit from a wide range of filtering and sorting options to obtain the best possible basis for your decisions.

Send request


Protect construction machinery from theft

The alarm manager notifies you immediately in case of unauthorized use of your machine fleet. Thus, in case of emergency, you have everything under control, & can react immediately to critical conditions.

There are countless possibilities for automatic notification. You can be informed about upcoming maintenance tasks as well as, for example, about the voltage status of the battery.



Evaluation of operating times

With the Proof of Service reports, you can provide your customers with clear and traceable proof of the service provided.

Save time and money with just one click.

Send request


Detailed information of machines & vehicles

With the help of the clear machine and vehicle management in Commander, you always have the perfect overview of your fleet.

Filter or sort according to specific object properties such as manufacturer, license plate number, and much more. If required, an automated transfer of machine and vehicle information from your IT system is possible at any time.



our telematics solution for the construction industry

24/7 location data

Real-time location of your construction machines as well as operating states.

Theft protection

Set alarms and notifications.
Immediate response in case of emergency.

Maschinensteuerung Icon

Machine control

Simple scheduling of your construction machinery. Plan ahead and conserve resources.


Comprehensive reports at the push of a button. Operating times, job site reports, performance comparison.


Comprehensive reports at the push of a button. Operating times, job site reports, performance comparison.

Operating hours

Accurate recording of operating hours. Automatic assignment to construction sites.

Service & Maintenance

Receive notifications even before the workshop appointment. Deposit of maintenance plans.

AEMP 2.0 ISO 15143-3 Icon


Acceptance of telematics data from machine manufacturers in accordance with the AEMP 2.0 / ISO 15143-3 standard


Your machines constantly in use

Avoid too long idle times of your construction machines.

With the help of our comprehensive web portal Commander, you can perfectly monitor the utilization of your machines.

Send request


through timely service of your construction machinery

Predictive maintenance cycles based on mileage and operating hours in real time enable an increase in the utilization of construction machinery, which in turn leads to a significant reduction in costs.

Thanks to telematics, our customers in the construction industry have realized an average reduction in operating and maintenance costs of around 18%.



Your construction machines always in view

Sometimes construction machinery, construction equipment, or small equipment on construction sites are forgotten or no longer found.

Thanks to our real-time position recognition, you always know where your construction machines and equipment are.

The costs of time-consuming searches for machines are now a thing of the past.

Send request


That is why leading construction companies choose us

"The focus of telematics for construction machinery is clearly on optimising internal operating procedures. With the help of telematics data and GPS tracking from Rosenberger, we have been able to significantly optimise the use of equipment in many organisational areas. Telematics data through versatile GPS trackers are also the reliable basis for internal disposition of machines and equipment."

Michael Heiden

Division Manager Quality Management,
IT Coordination and Corporate Development, Strabag BMTI

Read success story


Quality-assured installation with function diagnosis

The service app guides you step by step to a smooth & fast installation of our systems.

This ensures a high level of quality assurance and ensures that all our systems are installed properly.

No matter if you want to install 1 device or 10,000 devices - the service app supports you error-free and seamlessly.

To Google Playstore          To Apple Appstore


for telematics in the construction industry

Telematik Bauwirtschaft Bagger Walze und Kran


For machine types of all kinds. Reliable transmission of position data and detailed information (e.g.: operating hours, mileage, fuel consumption, location via GPS). Simply install & get started. AEMP 2.0 / ISO 15143-3

Telematik Bauwirtschaft LKW und Nutzfahrzeuge


For all vehicle types (cars, trucks, dump trucks and many more), detailed information (e.g.: Engine on/off, ignition on/off, operating hours, mileage, digital tachograph), Just install & go.

Telematik Bauwirtschaft Leiter Bohrer und Baggerschaufel

Small devices

Whether vibratory plate, compressor or drill, we track all your small machines and equipment (e.g.: position, operating hours, maintenance intervals).

Telematik Bauwirtschaft Container Silo und Rüttelplatte

Other objects

Silos, containers or excavator buckets, even objects without power supply can be tracked without any problems. Positioning via telematics (stand-alone) or BT beacons.


AEMP 2.0 / ISO 15143-3

Mit der Nutzung von AEMP 2.0 / ISO 15143-3 ist es möglich auf Herstellerdaten zuzugreifen, und diese direkt in ein Portal zu übertragen.
So bemerken Sie bei der Arbeit mit unserem Webportal "Commander" nicht, wie wir alles in einer Plattform für Sie vereinen.

Zu den Schnittstellen

AEMP 2.0 / ISO 15143-3
AEMP und API Schnittstellen zu IT-System
AEMP 2.0 / ISO 15143-3


Wir greifen die Daten der Hersteller gem. ISO-Norm ab, und bündeln diese in einem System.

Zu den Schnittstellen

Commander Funktionen Rosenberger Telematics

Alle Daten in einer Plattform

Einfache Verwaltung aller Herstellerdaten in unserem Webportal Commander.

Zum Commander


How to make your construction machinery and equipment smart

The robust construction equipment tracker records the date, time and operating hours of each operation and transmits them to the encrypted data center via an integrated SIM card.

From there, the data is forwarded to our Commander web portal.

Here you can view, edit & manage all operating times at any time.

Send request


Automated linking with dispatch / accounting & logistics systems

Requested machine data can be flexibly integrated into your IT system via a defined API interface.

The transmission of exact arrival times, real-time locations or operating hours into your own IT system enables you to optimize internal processes even more easily. 


What types of construction equipment, tools and small equipment can be tracked?

Our various GPS trackers and Bluetooth beacons can reliably locate almost any type of construction vehicles, construction machinery.

GPS tracking works for the following construction machinery, equipment and construction vehicles:

  • Excavators (hydraulic excavators, cable excavators, walking excavators, mini excavators, compact excavators, telescopic excavators, chain excavators, wheel excavators, etc.)
  • mini-excavators, wheel loaders, crawler loaders, graders, bulldozers, telescopic loaders
  • drilling and diaphragm wall equipment, pile drivers and extractors
  • dumpers, earth moving equipment, truck cranes, loading cranes, mobile cranes
  • Asphalt pavers, asphalt trucks, aerial work platforms,
  • transport equipment, trucks, light commercial vehicles, cars,
  • compressors, generators, containers
  • concrete pumps,
  • small equipment, hand-held power tools
Can all my vehicles and machines be displayed on one screen?

Yes, this is a key strength of the Rosenberger Commander telematics platform. It was specially developed for the specific requirements of the construction industry.

Our platform is manufacturer and machine independent and can not only locate construction machines, trucks, cars or small equipment that are equipped with Rosenberger telematics.

Especially the integration of telematics data of the most renowned construction machinery manufacturers via ISO15143-3 (AEMP 2.0) is an essential addition to retrofit telematics.

What data do I get from my vehicles and machines?

Basically, the position (incl. address) of the last data transmission with time stamp (data and time) is always transmitted.
Furthermore, additional information is produced, depending on the used Telematics hardware (GPS Tracker, BLE Beacon, etc.) produced, such as:

  • Ignition runtime
  • Engine runtime (operating hours)
  • Speed
  • Load / idle time
  • Fuel level
  • Battery voltage of construction machine, vehicles
What options are available for analysis and evaluation?

An important information is the so-called LIVE view, with which the current status or location of the machines, vehicles and equipment is displayed.

Furthermore, the PERFORMANCE module is a powerful tool for the clear display of performance data (e.g.: operating hours) of larger machine and vehicle fleets
in time comparison (day in hours, month in days, year in months). Hit lists can also be created easily with a mouse click.

The STATUS module provides an overview of the respective status of a machine or vehicle such as:

Operating hours, mileage, current driver/machine operator, current job site, etc.

Can damage be recorded directly on site at the construction site?

The Rosenberger SERVICE app makes it easy to record damage to construction equipment and machinery. The recording is carried out via smartphone (iPhone or Android) in a few steps, including photo documentation carried out.

Afterwards, the digital damage report is available as a PDF in the Commander for further processing.

In addition to the recording of damage to equipment, individual checklists (machine inspection) and the issue and acceptance at the construction yard can also be carried out.

How many construction machines, vehicles and equipment can be displayed simultaneously?

The Rosenberger telematics platform was specially designed to display a very large number of machines and vehicles.
The largest customers currently have an overview of over 20,000 units in Commander.

However, a major concern for us is also the clear representation of smaller machine fleets of 20 to several hundred units.

Can be informed automatically in case of theft?

Yes, the so-called GPS theft protection automatically informs you when a construction machine or vehicle leaves a previously defined area (geofence).
This area can be a construction site, a construction yard or even a construction lot (route section).

The alarm is automatically sent to one or more persons.

The virtual fence (geofence) can also be created larger and e.g.: also affect a whole country.

Can telematics data from the machine manufacturer be transferred to the telematics platform?lematikdaten vom Maschinenhersteller in die Telematik-Plattform übernommen werden?

The leading construction equipment manufacturers usually equip their machines with their own telematics systems ex works.

The OEM's (Original Equipment Manufacturer) systems usually supply numerous telematics and tracking data from their machines to the manufacturer's telematics platform. Since almost every construction company uses not only machines from one manufacturer, it makes sense to forward this telematics data via an interface to a central system, such as the Rosenberger Commander.

In order to standardize this data transmission, the leading construction machinery manufacturers have agreed on a data standard.
This standard is defined in the ISO15143-3 standard, or AEMP 2.0.

Rosenberger has linked this machine standard to the Commander via an interface (API). Thus, the machine data of the manufacturers can easily be transferred to the Rosenberger telematics platform.

Currently we take over machine data from the following manufacturers:

  • Kramer
  • Wacker Neuson
  • Zeppelin
  • JCB
  • Wirtgen
  • Vögele
  • HAMM
  • Komatsu
  • Takeuchi
  • more to follow ....

Learn more about AEMP

When purchasing your new construction machinery, find out whether the respective manufacturer offers the possibility of connection by means of ISO15143-3 /AEMP 2.0).


Is GPS Tracking surveillance?

Simply put, no.

We are clearly aware of our responsibility.

Therefore, it is our greatest concern to protect the data we process every day and to use it responsibly for the optimisation of machine and vehicle fleets.

One example:
The GPS tracking of vehicles of field staff can easily be issued by the employee himself. For this purpose, we have the "private trips" in our web portal Commander.

All our trackers that process GPS data run on highly secured servers. Our security regulations are very high in order to always be up to date.

Inventory & Analysis
Inventory & Analysis

Together we analyze your current situation. 
Many of your current logistics & management problems we can work out & filter together.


We now know where your problems lie, now it's time to solve them.
Due to our adaptability to your situation, we can easily grasp this and provide you with a non-binding offer.


You have decided on a solution and now want to integrate it optimally into your company.
No matter if you already receive telematics data from other manufacturers or if you want to enter the topic completely new - we help you to integrate everything simply & uncomplicatedly into your company cosmos.

Support & Training
Support & Training

After you have integrated our hardware & software solution into your company, our support & training sessions ensure that you can also use it optimally.
Thus, it is easy for you to work with the initially complicated data and to interpret them correctly.

Success awaits you
Success awaits you

Already after a short time you will notice that our solutions represent a return on investment and save a lot of time, costs & nerves.

Mehr erfahren


GPS tracker for construction


Robust GPS tracker (IP67) for recording ignition and engine running times. Suitable for construction machines of any size.

Send request


Passive Bluetooth tracker for position determination via smartphone or Rosenberger telematics.
Runtime guarantee of 7 years!

Send request


Wireless level meter for exact quantity measurement. Suitable for pressure silos up to 6 bar. 
Up to 10,000 messages per battery pack.

Send request


Wireless GPS system for accurate positioning. Suitable for objects without power supply (containers,transport containers,...). 
Up to 10,000 messages per battery pack.

Send request


Telematics system which is connected directly to the tachograph. Download of tachograph and driver files over the air. Exact recording of driving, working and break times.

Send request


Telematics systems for precise recording of lanes as well as ignition run times. Driver registration directly in the vehicle or via the Drive app. Change the trip type (private, company, way to work) directly at the push of a button.

Send request